Steel

Products

Sort by: Product Price Default
Battle Helmet - Steel
The Battle Helmet was created alongside our Battle Armor to provide battalions a matching full-piece set of armor. 270° protection and nose guard offer maximum defense while emblazoned crest and vertical comb compliment a clean and noble design. Add your own adornments to any of the three standard plume sockets to denote rank or faction. Battle Helmet fits most standard minifig heads.

Our price: $1.50
Quantity (219 available)
Centurion Helmet - Steel
The Centurion Helmet is actually descended from an earlier Greek (Attic) helmet which came into fashion after the original Corinthian fell out of favor. Essentially it was a Chalcidian helmet with no nasal bar, hinged cheek guards and an inverted V-shaped brow plate. It was quite popular in the early Greco-Roman world where it was often ornately decorated and mainly used in ceremony. The reliefs of Trajan's Column support the idea that the Attic helmet survived well into the 1st Century AD to be used by Roman officers such as Tribunes, Legates and Praetorians in similar fashion. Add our Officers Plume for additional flare. Fits most standard minifig heads.

Our price: $1.50
Quantity (1214 available)
Dwarven Helmet - Steel
The dwarves skill with mining, metallurgy and magic allows them to create fantastic artifacts of legend. The Dwarven Helmet is no exception. With its banded crown, exaggerated cheek guards and flared neck guard, this piece lives up to the expectations of even the most surly, robust dwarf warrior. Standard plume sockets on either side and top allow you to assign factions to your different clans using plumes or adornments. Dwarven Helmet fits most standard minifig heads & beards.

Our price: $1.50
Quantity (461 available)
Elven Helmet - Steel
The Elven Helmet is as stoic and graceful as the elves themselves. They are not easy to construct, and the finest ones could last for generations. It is no surprise that a certain amount of mystery surrounded both their making and their use. Honestly, we're not quite sure how the Angry DwarfSmith pulled this one off, other than to mention something about Faenor. Perfect for woodland sentries or equipping a column for battle, our Elven Helmet was crafted with side and top plume sockets for a variety of adornments. Pair up with either our Elven Blade or Elven Spear for a far deadlier threat. Fits most standard minifig heads.

Note: Brown Elven Helmets have a small surface stress mark near the upper eye hole. For a reason we can't explain the Brown color magnifies these marks which occur when they pop out of the mold.

Our price: $1.50
Quantity (413 available)
Gladiator Helmet - Steel
Based on traditional Thracian designs, our Gladiator Helmet is the perfect accessory for your minifigs waiting to skirmish in the Colosseum. Thracian gladiators naturally hailed from Thrace and were often captured in battle by the Romans and forced to fight for sport. Their helmets consisted of a wide metal brim encircling the helmet which was great for shielding against high and rear attacks. The massive crest rises high above the helmet itself creating somewhat of an intimidating effect. Their choice of weapon was either the Trident or a short curved sword, not unlike the ancient Spanish Falcata. Attach one of our Gladiator Masks for added effect. Fits most standard minifig heads.

Our price: $1.50
Quantity (1055 available)
Great Helm - Steel
The Great Helm of the High Middle Ages arose in the late 12th century in the context of the crusades and remained in use until the 14th century. They were used by knights and heavy infantry in most European armies. In its simplest form, the great helm was a flat-topped cylinder of steel that completely covered the head and had only very small openings for the eyes and mouth. Later designs gained more of a curved design, particularly on the top, to deflect or lessen the impact of blows. The BrickForge Great Helm features eye-slits that lineup with most standard minifig face designs and a standard plume socket on top. Fits most standard minifig heads.

Our price: $1.50
Quantity (238 available)
Hoplite Helmet - Steel
Probably developed in the 8th century BC, the Corinthian Hoplite Helmet was designed to offer maximum protection through its dramatic face shield and domed top which was perfect for resisting glancing blows. Designed skillfully, this helmet was created from one single piece of bronze. When not in use, these helmets could be pushed back to rest on the head. Use the Hoplite Helmet to recreate your favorite ancient battle or give your hero the protection he needs to slay that certain mythological creature. Add our Officers Plume for additional flare. Fits most standard minifig heads.

Our price: $1.50
Quantity
Legionary Helmet - Steel
The backbone of the Roman army were the Legionaries; and the Imperial Gallic style Legionary Helmet provided the protection they needed to conquer the known world. Much like the real thing, our Legionary Helmet features a sloped neck, chin guards, horizontal brow and a pair of distinctive embossed eyebrows on the forehead region. Add the Commander's Crest to turn your lowly Legionary into a Centurion or Tribune. Fits most standard minifig heads.

Our price: $1.50
Quantity (57 available)
Powered Assault Armor - Steel
Strap on* the Powered Assault Armor to give your minifig all sorts of neat gadgets to survive in the harshest of alien environments. It's unique ABS construction provides infantry an added layer of protection against hot/cold temperatures and irritating space dust. The rear of the armor is detailed with quick-jump thrusters, shield core, ventilation filters and a holster peg to store your BrickForge compatible MegaGun. For full vacuum combat add the Powered Assault Helmet and Powered Assault Visor (sold separately).

*Armor slides onto torso secured by the neck & head elements

Our price: $1.50
Quantity (221 available)
Powered Assault Helmet - Steel
Not even Thor's Hammer is capable of forging such elegant, yet functional headgear. Without such protection you send your commandos to certain defeat. Instead, consider equipping your minifig troops with the Powered Assault Helmet from BrickForge so they can pulverize all types of alien elites. Hydrostatic Gel and Reactive Metal Liquid Crystal Layer not included. For maximum armor and ability to mix-and-match colors don't forget to pick up both the Powered Assault Armor and Powered Assault Visor. Fits most standard minifig heads.

Our price: $1.50
Quantity (240 available)
Shock Trooper Helmet - Steel (cobalt visor print)
Caught in a hailfire of bombs, bullets and projectiles? Look up and you'll see a squad of Shock Troopers dropping out of orbit to save the day. Put on the Shock Trooper Helmet and submerge yourself into survival mode where its kill or be killed. Helmet features a sleek design and printed visor area to help recreate your favorite battle-ready environment and complete the mission without any casualties. For full vacuum combat add the Shock Trooper Armor (sold separately). Fits most standard minifig heads.

Our price: $1.50
Quantity (56 available)
Savage Mask - Steel (black & red print)
Who is that masked hero? Insure nobody ever finds out by donning the Savage Mask! It's tapered design is great for minifigs headed out on a playful Halloween excursion, engaging upon a serious quest or fighting mutant baddies. Fits most standard minifig heads.

Our price: $1.10
Quantity (182 available)
Goblin Shield - Steel (White Hand Print)
You might want to avoid besieging a stronghold without first forging some protection for your fodder. The menacing design of the Goblin Shield will strike terror through walls seven feet thick and its two teeth are quite effective at dealing unsuspecting blows. Flat inside consists of a centered, standard minifig grip.

Our price: $1.05
Quantity (457 available)
Anti-Material Sniper - Steel
The Anti-Material Sniper proves its worthiness as a long range weapons, capable of picking off single targets with a lethal shot. It can be used to neutralize significant threats that would have otherwise proved impossible. Other than serving as an offensive role, the rifle is fondly used as a spotting device: its scope is a very efficient tool for surveillance, reconnaissance and scouting, allowing the user to relay information back to other minifig-mates. Fits most standard minifig hands.

Our price: $1.00
Quantity (157 available)
Automag - Steel
The Automag is a pumped-up variant of an old favorite. Advantages include: increased accuracy by the addition of a muzzle brake which reduces recoil and increased effective range, making it a very formidable weapon when used against lightly armored infantry. The addition of a optics module, located underneath the suppressor/muzzle brake, gives the user 4x digital zoom for long range targets; the optics module also includes a flashlight to provide illumination in low-light situations. With all these upgrades its no wonder why the Automag is a favorite among space troopers all over the galaxy. Fits most minifig hands.

Our price: $1.00
Quantity (247 available)
Battle Axe - Steel
Whether its cutting wood or hewing stone, axes are a testament to millenia of cutting tool implements. It stands to reason that such devices were naturally recruited for military use. Just like as their utilitarian counterparts, Battle Axes came in an array of shapes, sizes, designs & purpose. Lighter, single-blade axes were used in close melee combat, whereas longer pole axes were intended to stun and dismount cavalry. The BrickForge Battle axe is influenced by the labrys family of double-headed war axes found in many Mediterranean cultures. Battle Axe fits most standard minifig hands.

Our price: $1.00
Quantity (212 available)
Battle Rifle - Steel
Battle Rifle fits most standard minifig hands.

Our price: $1.00
Quantity (450 available)
Canister Gun - Steel
Depending on the mission, the Canister Gun has the flexibility to launch a multitude of non-lethal rounds. Rubber bullets for suppression, tear gas for riot control, incendiary for halting vehicles and smoke rounds for cover. It's single-shot design is popular among law enforcement agencies, correctional officers and military peace-keeping forces. Fits most standard minifig hands.

Our price: $1.00
Quantity (478 available)
Compound Bow - Steel
A Compound Bow is a modern bow that uses an assisted levering system, usually of cables and pulleys, to bend the limbs. The added force makes it the first choice among hunters and misunderstood ex-military types (mission accomplished!). The bow features iconic rugged curves and split notches to assist in posing your favorite BrickForge Arrows (available separately). Fits most standard minifig hands.

Our price: $1.00
Quantity (557 available)
Crowbar - Steel
Physics at its finest! Minifigs rejoice as there now exists a tool capable of prying open all those scattered brown barrels. The Crowbar is traditionally used as a lever to force apart two objects and features both a flattened end and curved end w/ teeth to pull out pesky hardware. Also great for demolition, inverting car windows and bashing the skulls of a few undead critters. Fits most standard minifig hands.

Our price: $1.00
Quantity (503 available)
Cutlass - Steel
Cutlass

Our price: $1.00
Quantity (507 available)
Dragon Sword - Steel
If standard issue isn't as beguiling as your Horde demands, try arming them with the BrickForge Dragon Sword. Serrated edges guarantee a painful experience; and don't forget to peep through the openwork holes to catch a glimpse of your opponent's horrifying expressions. Dragon Sword fits most standard minifig hands.

Our price: $1.00
Quantity (598 available)
Elven Blade - Steel
For the most skillful fighters, the Elven Blade is light and sharp, and transforms any ordinary warrior on the battlefield into a force to be reckoned with. Unlike other weapons such as spear or axe, a these blades can't simply be assembled, it has to be forged and carefully tempered which requires dedicated labor and skill. The final purpose of each is to create a strong, light blade capable of holding a good edge. Elven Blade fits most standard minifig hands.

Our price: $1.00
Quantity (290 available)
Elven Spear - Steel
Perhaps the most ancient of arms, the spear was originally used for hunting and fishing prior to its use as a fairly versatile military weapon. The Elven Spear is a long-shafted weapon designed principally for thrusting, although many spears were also capable of slashing blows. A beautiful piece of craftsmanship this classic design has been made to create a nicely formed weapon - ideal for any of your custom characters. Elven Spear fits most standard minifig hands.

Our price: $1.00
Quantity (446 available)
Falcata - Steel
The Falcata is a type of sword typical of Pre-Roman Hispania, similar to the Greek Kopis and developed from the Canaan/Egyptian Khopesh. Designed for delivering strong cleaving blows the Falcata has a one-edged blade that pitches forward towards the point, the edge being concave on the lower part and convex on top. Great for hoplites, gladiators or dual-wielding assassins! Fits most standard minifig hands.

Our price: $1.00
Quantity (297 available)
Flamespitter - Steel
The Flamespitter is an advanced type of flamethrower - an incendiary device designed to project a long controllable stream of fire. Astonish your opponents as your squad of minifig elites execute a fiery brand of shock and awe. The BF Flamespitter does not actually present fire, however the 1.5mm hollow barrel can socket a small variety of related accessories for simulation. Optimal equipment to finish off incapacitated undead or stifle waves of outer-world creatures. Fits most standard minifig hands.

Our price: $1.00
Quantity (531 available)
Gladius - Steel
Evolving from the ancient bronze and iron edged weapons of the Hittites and Celts the Gladius became the blade that won the lands of the Roman Empire. Gladius is literally Latin for "sword" and emerged from the Iron Age to be used by Roman Legionaries from the 3rd century BC. The common Gladius was straight and double-edged, with a sharp V-shaped pointed tip and a rhomboid cross section - ideal for short, powerful thrusts. Fits most standard minifig hands.

Our price: $1.00
Quantity (142 available)
Goblin Sword - Steel
Although fairly primitive this short, broad-bladed sword is an inexpensive way to equip an army of thousands. The reverse tooth towards the top of the Goblin Sword is excellent at opening up armor allowing you to quickly follow up with a swift swipe of the blade. Fits most standard minifig hands.

Our price: $1.00
Quantity (869 available)
Grease Gun - Steel
Grease Gun fits most standard minifig hands.

Our price: $1.00
Quantity (707 available)
Hero Sword - Steel
Broadsword designs evolved into many different styles over the course of many cultures and time periods - the Hero Sword is no exception. Blade geometry is designed for cutting and slashing attacks while center boss and fluted guard add an exquisite touch. Suitable for sword-throwing water nymphs or grail-seeking Avalonians this BrickForge favorite is destined for your arsenal. Fits most standard minifig hands.

Our price: $1.00
Quantity
Hook Sword - Steel
Categorized as a civilian weapon the Hook Sword is a versatile armament. The spine is used like a regular sword, the sharpened hilt is used for stabbing, the crescent guard issued for deflecting and slashing, and the hook is used to trip enemies, catch weapons and of course rending open an enemy. First used in 1771 BC modern routines are often very flashy, and may involve techniques such as linking paired weapons and wielding them as a single long, articulated weapon. Fits most standard minifig hands.

Our price: $1.00
Quantity (300 available)
Javelin - Steel
The Javelin is the name of a light spear designed primarily for casting as a ranged weapon. Cohorts of throwers were often employed in hit-and-run maneuvers to harass and taunt unprotected battalions, disrupting close formations. Cavalries would often hurl several volleys to soften enemy forces prior to a frontal attack. Skill with a Javelin was so admired it became a regular part of the ancient Olympics. Fits most standard minifig hands.

Our price: $1.00
Quantity (51 available)
Longbow - Steel
The Longbow is a fairly tall, D-shaped bow which accomodatesan extra long draw. As such it has been instrumental in many cultures as both a hunting tool and weapon of warfare. In the Middle Ages the English were famous for their very heavy Longbows which were used to great effect against the French. Longbows also became popular amongst mounted Samurai warfare and Native American tribesmen. In the hands of skilled archers, hundreds of thousands of arrows could rain down on an opposing force with severe consequences. Grooves on upper and lower limbs allow you to actually string the Longbow using fishing line or thread. Fits most standard minifig hands.

Our price: $1.00
Quantity (414 available)
MegaGun - Steel
Designed in tandum with Mark Sandlin the classic styling of the MegaGun is sure to look good in the hands of your minifigs or featured in any of your MOCs. The MegaGun is engineered with both 1x1 & rod sized sockets in each of its twin barrels so you can add upgrades or load your favorite components. Standard 1x1 connection points line the sides, top and rear of the gun so you can go to town kitbashing your own ultimate weapon. MegaGun fits most standard minifig hands and holsters to the back of our Power Assault Armor.

Our price: $1.00
Quantity (817 available)
Nightstick - Steel
No law enforcment officer should be caught unawares without their handy Nightstick. From beat cops to prison guards this bludgeoning baton will bash in windows during a raid or beat back a senseless riot. Feeling extra creative? The Nightstick's traditional, yet simple design allows other components to connect so you can concoct your own custom club. Fits most standard minifig hands.

Our price: $1.00
Quantity (466 available)