White

Products

Sort by: Product Price Default
Scourge - White
Originating in ancient Egypt as a threshing tool, a Scourge is a whip or lash generally used to inflict severe corporal punishment or self-mortification. The typical scourge has several thongs fastened to a handle; at the end of which are tied thick, heavy knots. The Roman scourge, also called a flagellum, was often braided with a number of small metal pieces causing punishment to be particularly dreadful. A flogger with hooks at the ends was called a scorpion while one with nine thongs was called a cat o' nine tails. Whatever your application, this device is sure to bring offending minifigs down a notch. Scourge fits most standard minifig hands.

Our soft ABS plastic contains an additive making it flexible - but not stretchable. Excess tugging and twisting may result in tearing. Pieces broken due to excessive play are not eligible for replacement.

Our price: $1.00
Quantity (1498 available)
Shepherd Crook - White
The Shepherd Crook has been the staple accessory of herdsman since ancient times. Primarily used as a walking stick for treading uneven ground, the crook features a rounded head commonly used for rescuing and corralling livestock. A crook might also have been used to hold a sheep in place while the animal was shorn. The Shepherd Crook was also used as means of protection; the shepherd could easily ward off predators and lead the flock to safety. It has also seen symbolic use as a scepter held by Egyptian pharaohs and medieval clergymen. Fits most standard minifig hands.

Our price: $1.00
Quantity (417 available)
Spectro Goggles - White
While Goggles are generally used for eye protection they can also be used to intensify vision, particularly in low-light or multispectral environments. The BrickForge Spectro-Goggles are made of a flexible material so they can fit over most minifig headgear such as helmets or hair. Whether you're special ops or a paranormal ghost trapper these are a must-have for your minifig. Spectro-Goggles fit over most standard minifig headgear. Inner dimensions are approximately 12.5mm in diameter.

Our soft ABS plastic contains an additive making it flexible - but not stretchable. Excess tugging and twisting may result in tearing. Pieces broken due to excessive play are not eligible for replacement.

Our price: $1.00
Quantity (466 available)
Spill/Splat - White
Watch your shoes! Someone or something left a puddle; perhaps its best to leave it be until identified. The contoured design is cleverly crafted to fit on standard plates, baseplates, walls and anywhere else a mess is needed. Our variety of colors allows the Spill/Splat to be used as a surrogate for almost any liquid substance: Water? Radioactive Material? Tipped Beverages? Blood & Gore? It's up to you. Fits most standard 5mm 1x1 connection points.

Our price: $1.00
Quantity (636 available)
Tomahawk - White
Perhaps the most ubiquitous symbol associated with the Native Americans is the Tomahawk. The name was derived from an algonquian word 'tamahakan'; referring to an implement with a stone-head lashed with thongs to a wooden handle. Later, European-made iron or steel hatchets called trade tomahawks began to replace the stone weapons. Primarily used to chop wood and drive stakes into the ground, warriors also used their Tomahawks as clubs during hand-to-hand combat or threw them at their enemies from a distance. The tomahawk also had symbolic, ceremonial uses. It was laid on the ground at council meetings of some tribes. When the war leader took up the Tomahawk it meant that a decision for war was approved. To bury the tomahawk or 'bury the hatchet' meant an end to warfare.  Fits most standard minifig hands.

Our price: $1.00
Quantity (488 available)
Utility Belt - White
A belt is an adjustable band, made of either leather or a type of cloth, worn around the waist. It generally serves the purpose of supporting clothing items that would otherwise become too loose, particularly trousers, tunics or robes. Over time people found that belts were a great way to attach purses, weapons and other belongings of the wearer. A Utility Belt features pockets or loops to carry items the wearer needs for prompt use. Police officers, soldiers, repair personnel and the occasional super hero are typical roles which use such a belt. Four flexible holsters, molded directly into the belt, will hold most minifig accessories such as swords, guns or other types of minifig accessories. A standard 1x1 connection point on the front even lets you add your own decorative 'buckle'. Utility Belt fits over most standard minifig hips. Holster size is approximately 3mm x 2.35mm and fits accessories 3mm (or less) in diameter comfortably.

Our soft ABS plastic contains an additive making it flexible - but not stretchable. Excess tugging, twisting and attempts to fit bigger-than-intended elements inside holster slots may result in tearing. Pieces broken due to excessive play are not eligible for replacement.

Our price: $1.00
Quantity (337 available)
Waist Armor - White (red print)
Often derided as a 'skirt', the Waist Armor's abitlity to protect against low-flying shrapnel - as well as harsh environmental elements - won out over any disparaging criticism. Add the Waist Armor to a medieval minifig to replicate a fancy surcoat, or strap it onto a galactic jet trooper to rebuff jetpack downwash. The Waist Armor is made of flexible plastic to increase posability - even allowing the minifig to sit down. A side-mounted holster, directly molded into the armor itself, is flexible enough to stow away blades, guns or other traditional accessories. Waist Armor fits over most standard minifig hips. Holster size is approximately 3mm x 2.35mm and fits accessories 3mm (or less) in diameter comfortably.

Our soft ABS plastic contains an additive making it flexible - but not stretchable. Excess tugging, twisting and attempts to fit bigger-than-intended elements inside holster slots may result in tearing. Pieces broken due to excessive play are not eligible for replacement.

Our price: $1.00
Quantity (229 available)
Night Vision Goggles - White (lime green lens print)
Night Vision Goggles is an optical instrument that allows images to be produced in levels of light approaching total darkness. Most often used by the military and law enforcement, civilian models have been made available for hunters, nature watching or tracking elusive cryptids. The BrickForge Night Vision Goggles attach exclusively to our Tactical Helmet for a unique, customized look.

Our price: $0.80
Quantity (202 available)
Tactical Goggles - White (dark blueish gray print)
Military & Tactical Goggles are designed to meet the ballistic, optical and performance standards of the most demanding mission-critical situations and harshest of conditions. Lightweight and comfortable the Tactical Goggles are increasingly used by law enforcement, special ops, tactical groups and military squads as standard eyewear protection. Tactical Goggles attach exclusively to the BrickForge Tactical Helmet for a unique assembly.

Our price: $0.80
Quantity (122 available)
Ammo Pouch - White
Ammo Pouches are typically used by gun-wielders to stow stacks of ammo, that is, shot or bullets; but can also be used  to carry smaller supplies. Such equipment is crucial to hunters, soldiers and tactical outdoorsmen whose role mechanics and attacks depend on using large amounts of ammunition in a short amount of time. Ammo Pouch fits most standard minifig hips and 1x1 connection points.

Our price: $0.75
Quantity (102 available)
Anti-Material Sniper - White
The Anti-Material Sniper proves its worthiness as a long range weapons, capable of picking off single targets with a lethal shot. It can be used to neutralize significant threats that would have otherwise proved impossible. Other than serving as an offensive role, the rifle is fondly used as a spotting device: its scope is a very efficient tool for surveillance, reconnaissance and scouting, allowing the user to relay information back to other minifig-mates. Fits most standard minifig hands.

Our price: $0.75
Quantity (69 available)
Gas Mask - White
If your minifigs are finding their way into a cloud of disaster its best to snap-on the BrickForge Gas Mask. The mask (or respirator) forms a sealed cover to protect the wearer from inhaling harmful dusts, fumes, vapors, and toxic gasses. Whether your staging an urban riot or post-apoc display, the Gas Mask is a must have accessory to round out the scene. Gas Mask attaches exclusively to the BrickForge Tactical Helmet.

Our price: $0.75
Quantity (544 available)
Hero Hair - White
Consider this curious coif to cause quite a commotion in the community! Hero Hair is the perfect choice for that minifig who just finished battling a mutant undead army or is simply going for that tussled look. Fits most standard minifig heads.

Our price: $0.75
Quantity (82 available)
Maverick Hair - White
Maverick Hair
Fits most standard minifig heads.

Our price: $0.75
Quantity (308 available)
Mohawk - White
Made popular by the punk rockers of the 80's the Mohawk was worn by tribal peoples as far back as 2000 yrs ago and is named for the Native American people of the Mohawk nation. The Mohawk can be worn in several fashions and is considered to be quite the 'high maintenance' hairstyle - especially when hair dye is involved. Our Mohawk is indicative of the 'beaver' style maintains a low-profile appearance while still looking tough - a great piece if your minifig is looking to make a statement or intimidate fellow figs. Fits most standard minifig heads.

Our price: $0.75
Quantity (280 available)
Powered Assault Visor - White
The Powered Assault Visor is exclusively intended to fit our Powered Assault Helmet. Choosing from a variety of colors you can limit the amount of light that enters the helmet or pretend to command your troops via heads up display. The visor simply snaps into the Powered Assault Helmet using two small pegs on either side.

Our price: $0.75
Quantity (261 available)
Tactical Sidearm - White
Sidearms are smaller, compact weapon worn on the body in a holster to permit immediate access and use. Tactical Sidearms are typically required equipment for military personnel and sometimes carried by law enforcement. A sidearm may be carried alone, or as a back-up to a primary weapon such as a rifle or carbine. Fits most standard minifig hands.

Our price: $0.75
Quantity (85 available)
Walkie Talkie - White
The Walkie-Talkie (formally known as a handheld transceiver) is a hand-held, portable, two-way radio transceiver. Developed during the Second World War similar designs were created after the war for such applications as public safety and jobsite work. Walkie-Talkies are now widely used in any setting where compact communications are necessary, including business, law enforcement, outdoor recreation and heavy industry. Consumer models make the Walkie-Talkie fairly ubiquitous, even as toys among young children. Fits most standard minifig hand.

Our price: $0.75
Quantity (170 available)
Ballistic Mask - White
As a part of personal protection gear, ballistic face masks are made in a way to protect the face of the wearer from explosives, shrapnel and other such ballistic threats. The Ballistic Mask snaps directly onto our Tactical Helmet so you can pose your minifigs engaging in a mini-shootout or avoiding simulated explosive rounds on the battlefield.

Our price: $0.50
Quantity (382 available)
Broken Bottle - White
Watch out for flying glass! Whether accidental or intentional a Broken Bottle is the iconic weapon-in-a-cinch for brawlers everywhere. Ideal for scattering across debris-littered post-apoc displays. Bottle features four standard connection points useful for gripping, capping or attaching other compatible elements. Fits most standard minifig hands.

Our price: $0.50
Quantity (797 available)
Chin Strap - White
If your minifig is tired of having a chin strap tattooed onto their faces, why not add a bit of realism by equipping the Chin Strap from BrickForge? The Chin Strap snaps directly onto any of our Tactical Helmets for a unique, customized look. And we're positive your figs will appreciate the additional protection.

Our price: $0.50
Quantity (307 available)
Face Shield - White
A Face Shield is a device used to protect the wearer's entire face from impact hazards such as flying objects, road debris, chemical splashes or potentially infectious fluids. Connect the Face Shield directly onto the BrickForge Tactical Helmet for enhanced protection. Also designed to fit some official headgear.

Our price: $0.50
Quantity (377 available)
Headlamp - White
A Headlamp is a flashlight worn on the head for hands-free operation in dark environments such as mines, underground caverns and smoke-filled rooms; which means your miner, spelunker and firefighter minifigs can concentrate on more important things while wearing this accessory. It's flexible design means it can fit over most minifig headgear such as helmets or hair. A standard 1x1 connection point lets you add our Lens Piece, Gemstone or other decorative piece. Inner dimensions are approximately 12.5mm in diameter.

Our soft ABS plastic contains an additive making it flexible - but not stretchable. Excess tugging and twisting may result in tearing. Pieces broken due to excessive play are not eligible for replacement.

Our price: $0.50
Quantity (871 available)
Trident - White
The Trident gets its name from the Latin three-teeth and was originally used by fishermen to skewer multiple fish at a time. Not unlike many other hunting untensils the Trident naturally found combat use as a military weapon. Hailed for its long reach and ability to trap other weapons between its prongs they were used fondly by gladiators to disarm opponents and deliver the final blow. Trident fits most standard minifig hands.

Custom helmet by Arealight.

Our price: $0.50
Quantity (456 available)
Pulse Ray - White
Add some FX to your minifig duels. The Pulse Ray fits into most rayguns and laser swords or any other connection point accepting standard 3mm components including minifig hands.

Our price: $0.45
Quantity (837 available)
Officer Plume - White
The brightly dyed horsehair plumes attached to ancient helmets were mainly designed to make the warrior appear taller and more menacing. In later periods when the concept of uniforms and ranks began to develop plumes also served as a badge of rank. Promote your Greek or Roman warrior up through the ranks using one of our colorful Officer Plumes. Engineered to fit both our Centurion Helmet & Hoplite Helmet, these plumes can also fit on most standard plume sockets.

Our price: $0.35
Quantity (66 available)
Turban - White
A variety of headgear was seen throughout the history of the eastern world. The Turban was easily the most ubiquitous and indicated an individual's origin, religion and status. The imamah adhahaba form of turban is wound around a small qalansuwah hat - just visible on top - and the ends of the turban-cloth hang loose to form a rafraf. Such turbans were worn by sultans and nobles during the Crusades, often wrapping them around their battle helmets or decorative diadems. The BrickForge Turban comes in two easy-to-assemble pieces and is engineered to fit with our Arabian Helmet Fits most standard minifig heads.

Our price: $0.25
Quantity (1725 available)
Warning Light - White
Give traffic a heads up with the Warning Light. Attach to most standard 5mm connection points to decorate emergency vehicles or illuminated space ships. Works great with LifeLites! Flip it over to use as a specimen cup or drinking glass. What other uses can you come up with? Fits most standard 5mm 1x1 connection points.

Our price: $0.25
Quantity (721 available)
Double Plume - White (blue print)
Often secured atop a gentleman's hat or uniform headdress the plume signified a token of honor or achievement. Plumes were also placed atop military helmets to denote the rank of the wearer. Such ornaments were mainly plucked from prominent or rare species of bird. The classic Double Plume design features opposite, flowing feathers and a diameter that allows for a standard minifig grip. Peg is designed to fit most traditional plume sockets including our own Dwarf Helmet , Elven Helmet, Great Helm, & Hoplite Helmet.

Our price: $0.20
Quantity (278 available)
Double Plume - White (red print)
Often secured atop a gentleman's hat or uniform headdress the plume signified a token of honor or achievement. Plumes were also placed atop military helmets to denote the rank of the wearer. Such ornaments were mainly plucked from prominent or rare species of bird. The classic Double Plume design features opposite, flowing feathers and a diameter that allows for a standard minifig grip. Peg is designed to fit most traditional plume sockets including our own Dwarf Helmet , Elven Helmet, Great Helm, & Hoplite Helmet.

Our price: $0.20
Quantity (121 available)
Double Plume - White
Often secured atop a gentleman's hat or uniform headdress the plume signified a token of honor or achievement. Plumes were also placed atop military helmets to denote the rank of the wearer. Such ornaments were mainly plucked from prominent or rare species of bird. The classic Double Plume design features opposite, flowing feathers and a diameter that allows for a standard minifig grip. Peg is designed to fit most traditional plume sockets including our own Dwarf Helmet , Elven Helmet, Great Helm, & Hoplite Helmet.

Our price: $0.10
Quantity (957 available)
Gladiator Mask - White
Masks were often worn during the gladiatorial events to reduce the crowds' affinity with the warriors' identities. Of course the Gladiator Mask was also great for protection - even though it could be quite stifling and hinder peripheral vision. Perhaps what it lacked in function, it made up in form; opponents would never know where the eyes were looking, and the completely alien nature of the mask had to be unsettling. Combine with our Gladiator Helmet to assemble a diverse group of those that will salute you!

Our price: $0.10
Quantity (292 available)
Laser Beam - White
Add some FX to your minifig duels. The Laser Beam fits into most rayguns and laser swords or any other connection point accepting standard 3mm components including minifig hands.

Our price: $0.05
Market price: $0.45 save 89%
Quantity (131 available)
Udder - White
Got Milk? Turn any of our Cows into a *dairy-producing bovine with the addition of a BrickForge Udder. Udders are clipped onto the underside of the cow using a simple clip-on bracket and can be removed at anytime. Perfect for adding a bit more realism to your MOC.

*BrickForge Cow does not **really produce milk!
** I can't believe I actually have to clarify this.

Our price: $0.02
Quantity (1437 available)